WyWires Silver, Platinum, and Diamond Series
Custom Designed Cables for Speakers, Digital, Phono, Analog Interconnects, and Power Cords
Silver series is the classic line that started the revolution in air dielectric, Litz wire design. The Silver line embodies WyWires’ design philosophy of ”less is more,” yielding unprecedented electrical and sonic performance. Identified by gray/silver outer sheathing.
Up to 4x the conductivity of stock cables
Reduces capacitance that causes time-delay smearing and transient masking
Reduces signal cross-talk
Product Specifications
Speaker Cables
Utilizing Litz wire, air dielectric technology, speaker cables are engineered to preserve the output of any amplifier to any speaker regardless of the speakers’ load difficulties. Speaker cables are neutral with very high bandwidth that will preserve the nuances and tonal palette present in advanced loudspeaker and amplifier designs where usable output can exceed 50KHz. Speaker cables are available in single, double and triple wire configurations and can be fitted with spade lugs and or banana plugs.
Digital Audio Cables
It enables your system to preserve all of the detail, dynamics, ambiance and presence that are present in the recording.WyWires digital cables ensure perfect electrical parameters – low capacitance, rejection of crosstalk and external interferences along with perfect characteristic impedance for the specific application. Bandwidth is very high and impedance is low and stable across the entire operating frequency of the cable which can be as high as 60MHz.
Phono Cables
These are available in virtually any configuration to fit any tonearm where the output cable can be detached.A typical moving coil phono cartridge is able to generate a signal that is as low as 0.2 millivolts or as high as 3.0 millivolts. The highest output of any phono catridge we are aware of is 5 millivolts. Although the range of output in phono cartidges is broad, this output is minuscule compared to the output of a DAC, CD player or preamplifier. Phono cables are engineered with this output disparity in mind and not simply a reconfigured analog interconnect. WyWires phono cables are unshielded as standard but can be ordered shielded at no additional cost.
Analog Interconnects
They provide excellent electrical performance in all parameters.The geometry of interconnect cables enables an extremely low noise floor resulting in exceptional clarity, dynamic range, detail and ambient retrieval, as well as presence and soundstage that accurately captures the original venue and event. nalog interconnects exAhibit very high bandwidth, stable resistance and great frequency extension while at the same time preserving an organic and accurate tonal palette.Available in single ended (RCA or TRS) and balanced (XLR) configurations or any combination to suite unusual requirements.
Power Cords
While a power cord will not add or subtract volts or amps (unless it’s undersized) we are able to partially correct phase anomalies present in the power grid. WyWires Litz wire power cord with its asymmetrical Litz bundles actually improves image focus, soundstage size and “openness” and helps to preserve the presence and scale of the original performance. The Juice II power cord is sized adequately for any known amplifier regardless of its current draw. Available in any length up to 20 feet and can be fitted with 15 or 20 amp IEC plugs along with NEMA (North America), Schuko (Europe) UK and Australia input plugs.
